BEGIN /t3_blank/html/com_hikashop/product/show.php

BEGIN html/com_hikashop/product/show_default.php

Share Print Email

Strip Curtains – Tinted

BEGIN LEFT part within show_default.php

END left part within show_default.php

BEGIN RIGHT part within show_default.php

BEGIN html/com_hikashop/product/show_bock_custom_main.php

Steiner’s tinted welding strip curtains are widely used for welding applications to enclose workstations or machinery. Welding tinted strip curtains are flame retardant and filter most ultraviolet radiation, while allowing useful visible light into the area. Protect against sparks and spatter, and permit safe, easy access of walk-through traffic or movement of equipment into the area.

  • Flame retardant; meets California Fire Marshal requirements
  • Blocks most UV radiation and protects workers in adjacent areas from welding flash
  • Reduces energy cost
  • Barrier for dust, smoke, flying debris, and sparks and spatter from welding
  • Reduces noise
  • Highly transparent and allows natural light in dark areas
  • Provides easy access
  • Available in two widths/thicknesses: 8"/.080", 12"/.120"
  • Available in amber, orange, and blue (see table below)

WARNING: This product can expose you to chemicals, including Diisononyl phthalate (DINP) which is known to the State of California to cause cancer. For more information go to www.p65warnings.ca.gov

END html/com_hikashop/product/show_bock_custom_main.php

END right part within show_default.php

  • Flame retardant; meets California Fire Marshal requirements
  • Blocks most UV radiation and protects workers in adjacent areas from welding flash
  • Reduces energy cost
  • Barrier for dust, smoke, flying debris, and sparks and spatter from welding
  • Reduces noise
  • Highly transparent and allows natural light in dark areas
  • Provides easy access
  • Available in two widths/thicknesses: 8"/.080", 12"/.120"
  • Available in amber, orange, and blue (see table below)
WARNING: Tinted Transparent vinyl welding strip curtains are not intended as a substitute for normal eye protection for close or long-term viewing. The user must wear protective eyewear suitable for the application. Clear Transparent vinyl is not for use in welding applications.

SPECIFICATIONS

Attribute Value
Steiner BrandSteiner
Product Category Welding Strip Curtains
Product Type Tinted strip curtains
MaterialTinted transparent PVC
Compliance 1Meets California Fire Marshal requirements
Connection methodSee hardware for strip curtains
Special Feature 1Blocks most UV radiation and protects workers in adjacent areas from welding flash
Special Feature 2See mounting hardware for strip curtains

HOW TO ORDER

Steiner recommends different thickness, width and height of strips for various applications.

OVERLAP/WIDTH GENERAL GUIDELINES

  • Partial Overlap – for light to medium personnel traffic 8" wide strips with 1/2 overlap recommended. For medium/heavy personnel traffic a 12” wide strip with 2/3 overlap is recommended.
  • Full Overlap- For vehicle or heavy personnel traffic full overlap is recommended.

 HEIGHT

Not recommended to use 8” wide strips for height over 8’

 OPENING SIZE TO LOAD HEIGHT RATIO

If the opening is small in relation to the size of the load being moved, consider smaller width strips with less overlap because the strips are more prone to dragging over the load.

 OTHER CONSIDERATIONS

Always consider using wider strips and/or more overlap for large openings or openings with heavy welding operations or drafty conditions.

 HOW TO ORDER STRIP CURTAINS:

  1. Determine width of the strips and overlap 
  2. Determine the mounting method, then select Mounting Hardware.
  3. Measure height and width of your door, opening, or area to enclose.
  4. Select the color desired.
  5. Select the Part Number from the table.
  6. Order hardware separately.

MOUNTING HARDWARE & INSTALLATION

Steiner’s technical team can help you to determine all the necessary hardware you will need based on your installation mounting method and your configuration.

UNIVERSAL MOUNT

Steiner's Universal Mount is made of 16-gauge galvanized steel. Permanent 1/4" threaded studs on 2" centers allow the pre-punched strips to be mounted to horizontal or vertical surfaces easily and quickly. Standard available lengths: 3', 4', 5' ,6' and 8'. 

steiner-tinted-transparent-vinyl-strip-curtain-tnp-universal-mount-47403-thru-47408

47403 - 3', 47404 - 4', 47405 - 5', 47406 - 6', 47408 - 8'

Strip Door Hardware

steiner-tinted-transparent-vinyl-strip-curtain-tnp-47403-usage

In Use with Strip Curtains

Mounting Hardware

steiner-tinted-transparent-vinyl-strip-curtain-tnp-header-mount

Header Mount

Attaches to the lintel of inside doorway. Order strips 1-1/2" shorter to accommodate hardware. 

steiner-tinted-transparent-vinyl-strip-curtain-tnp-header-mount

Wall Mount

Attaches to wall surface immediately over doorway (above door jamb).

steiner-tinted-transparent-vinyl-strip-curtain-tnp-threaded-rod

Threaded Rod

Suspends by clamp and 1/2" rod from overhead beam.

steiner-tinted-transparent-vinyl-strip-curtain-tnp-floor-mount

Floor Mount

Utilizes upright floor columns up to 10' high.

 


PIPE MOUNT

Steiner’s Pipe Mounting system allows easy mounting of strip curtains anywhere that you can run an overhead pipe

  • Pipe Mount system fits up to 2" diameter pipe 
  • Requires 3 clamps per linear foot
  • Each pipe clamp is 4” wide and holds 2 strips (overlapped)

steiner-tinted-transparent-vinyl-strip-curtain-tnp-pipe-mount-47301

47301

Pipe Mount Hardware includes 1 pre-curved hang clamp, 1 pre-curved cover clamp and 2 locknuts.

steiner-tinted-transparent-vinyl-strip-curtain-tnp-pipe-mount-47301

In Use with Strip Curtains

 


ADJUST-A-WALL™ STRIP TROLLEY MOUNT

Adjust-A-Wall™ Trolleys allow vinyl strip curtains to be installed on Track and Roller Systems to allow the strip curtains to slide out of the way and then back. Straight trolleys are available in 18", 24" and 36" and hinged trolleys come in three 4" segments and all can be combined.

steiner-tinted-transparent-vinyl-strip-curtain-tnp-straight-trolley-44606-thru-44608

44606- 18", 44607 - 24",
44608 - 36"

Straight Rolling Trolley – Nylon wheels roll along straight track. Consecutive trolleys can be linked together.

steiner-tinted-transparent-vinyl-strip-curtain-tnp-hinged-trolley-44610

44610- 12"

Hinged Trolley – Nylon wheels roll through curved track as well as straight track. Three 4”-segments hinged together to allow rolling on curved track.

steiner-tinted-transparent-vinyl-strip-curtain-tnp-hinged-trolley-44610-usage

In Use with Strip Curtains

PART NUMBERS FOR ORDERING

STRIP CURTAINS – TINTED
    8" WIDE/.080" THICK 12" WIDE/.120" THICK
   

AMBER

 

ORANGE

 

BLUE

 

AMBER

 

ORANGE

 

BLUE

 

Sold By Overlap Part Number  
Area(sq.ft.) 1/2 73485 73885 73585
  2/3 73427 73827
  FULL 73480 73880 73580 73420 73820
Cut Length(ft.) N/A 73408 73808 73508 73412 73812
300 ft.Roll  N/A 63408 63808 63508
150 ft.Roll N/A 63412 63812

 

AVAILABLE COLORS

Strip curtains are available in Amber, Orange, and Blue.

steiner-tinted-transparent-vinyl-strip-curtain-tnp-amber

steiner-tinted-transparent-vinyl-strip-curtain-tnp-orange

steiner-tinted-transparent-vinyl-strip-curtain-tnp-blue

END html/com_hikashop/product/show_default.php

Related Products

BEGIN t3_blank/html/com_hikashop/product/listing_div.php

BEGIN top page limit filter t3_blank/html/com_hikashop/product/listing_div.php

Results 1 - 1 of 1

END t3_blank/html/com_hikashop/product/listing_div.php

BEGIN bottom page limit filter t3_blank/html/com_hikashop/product/listing_div.php

Results 1 - 1 of 1

END bottom page limit filter t3_blank/html/com_hikashop/product/listing_div.php

END /t3_blank/html/com_hikashop/product/show.php